Local Service

Deck Staining in Colorado Springs & the Pikes Peak Region

Colorado sun is brutal on wood. Big Blu's power washes, sands and re-stains cedar, redwood and pressure-treated decks with high-solids, UV-rated stains and sealers so your deck stops graying and splitting.

Big Blu's stains and seals decks across Colorado Springs using high-solids, UV-rated finishes built for high-altitude sun. Colorado's thin air, intense UV and freeze-thaw cycles gray out and split unprotected wood faster than almost anywhere in the country, so prep matters more here: we power wash, brighten, let the boards dry to the right moisture content and sand rough grain before a drop of stain goes on. Then we brush and back-roll two coats into the wood instead of spraying and walking away. Semi-transparent, semi-solid and solid stains are all available, and we bring sample boards so you approve the color on your own deck in Colorado Springs light before we start.

What we offer

  • Power washing and mildew/tannin cleaning
  • Sanding, board prep and fastener tightening
  • Semi-transparent, semi-solid and solid stain
  • Penetrating oil and UV-blocking sealers
  • Railing, stair and pergola staining included
  • Fence and pergola staining bundled with the deck

Why Big Blu's

  • High-solids stains rated for 6,000+ ft UV exposure
  • Full prep — we never stain over dirt or mildew
  • Sample boards so you approve the color first
  • Fully insured Colorado small business since 2017

Deck Staining options & materials

Pick the material and style that fits your property, budget and HOA.

  • Clean & seal

    Wash, brighten and apply a clear or toned penetrating sealer.

  • Semi-transparent stain

    Shows the grain with real UV pigment — the Front Range favorite.

  • Solid-color stain

    Best for older, weathered decks that need uniform coverage.

  • Sanding & restoration

    Sand out gray, feather old finish and set popped screws.

  • Railing & pergola staining

    Rails, posts, stairs and shade structures finished to match.

  • Fence staining add-on

    Stain your cedar fence on the same visit and save a mobilization.

Our deck staining process

  1. Step 1
    Color consult & quote

    We sample two or three stains on your boards and email an itemized quote.

  2. Step 2
    Prep

    Power wash, brighten, let the wood dry to spec moisture, sand rough spots.

  3. Step 3
    Stain

    Two coats brushed and back-rolled into the grain, not sprayed and left.

  4. Step 4
    Cure & walkthrough

    Light foot traffic in 24 hours, furniture back in 48.

Deck Staining FAQ

How often should a deck be stained in Colorado Springs?
At Front Range altitude, plan on re-staining a Colorado Springs deck every two to three years. Full-sun and south-facing decks are closer to two; shaded decks can stretch to four.
Do you power wash before staining in Colorado Springs?
Always. Every Colorado Springs deck is washed, brightened and dried to the right moisture content before any stain goes down — staining over dirt is why finishes peel.
Semi-transparent or solid stain?
Semi-transparent keeps the grain visible and is our default for cedar in Colorado Springs. Solid stain is the better call on older, weathered or previously painted decks.
How long before I can use the deck?
Light foot traffic after about 24 hours and furniture back after 48, weather depending. We schedule Colorado Springs jobs around dry-weather windows.

Pair your deck staining project with our other Colorado Springs services, or jump straight to a city page below.

Complementary services
Nearby deck staining locations

Get a custom deck staining quote today

Free on-site estimates across Colorado Springs and the Pikes Peak region.